Soundcore Motion X600 | Testbericht - Kopfbox.de | Kopfhörer, DAP, Kopfhörerverstärker und alles um mobiles Audio im Test (2024)

Es ist wieder einmal Sommer. Spätsommer, okay. Trotzdem spielen Bluetooth-Boxen noch eine große Rolle auf der Terrasse oder am Pool. Das weiß auch Anker – und hat die passende Unterstützung in Form des neuen Soundcore Motion X600 am Start. Was der neue besser macht als die Geräte der Boom Reihe? Ich versuche es herauszufinden!

Inhalt

  • 1 Anker Soundcore Motion X600
  • 2 Verarbeitung und Design
  • 3 Technische Daten
  • 4 Lieferumfang
  • 5 Funktionen Soundcore Motion X600
  • 6 Konnektivität
  • 7 APP
  • 8 Akkulaufzeit
  • 9 Klangqualität
  • 10 Fazit

[Werbung]Der Speaker wurde mir für diesen Test direkt von ANKER/Soundcore zur Verfügung gestellt – vielen Dank!

Anker Soundcore Motion X600

Der Zubehörspezialist Anker ist längst auch als Anbieter von Audio-Equipment bekannt. Unter der Marke Soundcore gibt es Kopfhörer, Inears und Bluetooth-Boxen.

Mit den Bluetooth Boxen aus der Boom Serie hat man gut klingende Boxen für relativ kleines Geld am Start.

Nun setzt man aber noch einen oben drauf und hat mit dem Motion X600 zwar eine nicht noch größere, wohl aber stylischer und laut Anker besser klingende neue Bluetooth Box entwickelt. Auch preislich bewegt man sich weiter und ruft nun knapp 200€ auf.

Die Motion X600 verfügt erneut über einen Treiber mehr und spielt somit mit 5 Treibern auf. Leistungsmäßig reiht man sich mit 50 Watt zwischen Motion Boom und Motion Boom Plus ein. Und natürlich ist der neue Speaker wieder Wasserdicht nach IPX7.

Neu ist „Spatial Audio“, eine DSP Technik, die ein noch raumfüllenderes Sounderlebnis ermöglichen soll. Hierzu befindet sich neben den Speakern in der Front auch noch ein weiterer auf der Oberseite.

Ebenfalls neu und bisher kaum verbreitet unter BT-Boxen: Hi-Res. Der X600 kann per LDAC Hi-Res Audio empfangen und wiedergeben. Ob das bei einem kleinen Bluetooth-Böxchen Sinn macht bzw. hörbar ist, muss jeder selbst entschieden. Apple Nutzer bleiben sowieso erstmal außen vor, da es hier keinen LDAC Support gibt.

Verarbeitung und Design

Das Design des Soundcore Motion X600 ist äußerst gelungen wie ich finde. Der über die ganze Gerätebreite laufende Griffbügel erinnert an ein Kofferradio aus vergangenen Zeiten. Das Gehäuse ist nicht mehr aus Kunststoff, sondern aus Metall – ich vermute Alu – gefertigt und hat durch die matt-blaue Farbe einen hochmodernen Touch. Optisch wie haptisch wirklich sehr edel. Der Motion X600 ist übrigens in drei Farben zu haben. Neben dem mir vorliegenden „Polargrau“ gibt es noch „Mondblau“ und „Auroragrün“.

Das Gehäuse wirkt robust und und haltbar, ein Sturz dürfte aber nicht ohne Blessuren bleiben. Unschöne Macken wären definitiv die Folge. Gummierte Standfüße verhindern effektiv ein (Ver-) Rutschen auf glatten Untergründen.

Technische Daten

Technische Daten sind schwer zu finden – meiner Meinung nach aber auch immer noch überbewertet. Anyway – das ist das, was ich gefunden habe:

  • Ausgangsleistung: 50W
  • Akkukapazität: 6.400mAh
  • Laufzeit: ca. 12h
  • Schutzklasse: IPX7

Lieferumfang

Der Speaker kommt in einer ansprechend bedruckten, handlichen und stabilen Pappbox. Lediglich ein USB-C Ladekabel befindet sich neben dem üblichen Papierkram noch im Lieferumfang. Auf ein Ladegerät wird verzichtet, so gibt es keinen zusätzlichen Elektroschrott.

Zusammenfassend findet sich also im Lieferumfang folgendes:

  • Anker Soundcore Motion X600
  • USB to Type-C Ladekabel
  • Anleitung

Funktionen Soundcore Motion X600

Das Koppeln per Bluetooth mit meinem iPhone geht schnell und ohne Probleme.

Die Bedienung erfolgt über das Abspiel-Device oder direkt am Gerät. Über die Hardwaretasten an der Box kann die Musikwiedergabe gesteuert werden: Lautstärke, Play/Pause und Titelsprung vorwärts bzw. zurück ist möglich.

Telefonieren
Sehr gut finde ich die Möglichkeit, den Speaker auch als Freisprechgerät in Verbindung mit dem Smartphone beim Telefonieren nutzen zu können. Mittig auf dem Tisch platziert funktioniert das Ganze sehr gut, die Sprachverständlichkeit ist super. Konferenzsystem light, quasi…

Konnektivität

Klar, ein Bluetooth Lautsprecher wird in erster Linie drahtlos verbunden. Auch der Motion X600 besitzt wieder einen 3.5mm AUX Anschluss für ältere Geräte.

APP

Neben Firmwareupdate, Ladestand und Einstellungen wie Standby-Zeit etc. findet sich in der App auch ein brauchbarer Equalizer. Damit ist es sehr easy, den Klang an die eigenen Vorlieben anzupassen. Neben vorgefertigten Profilen kann auch ein individuelles Profil erstellt und gespeichert werden.

Akkulaufzeit

Der Akku ist mit 6.400mAh ausreichend bemessen, der Hersteller gibt eine Laufzeit von ca. 12h h an. Der Motion X600 kann leider nicht als Powerbank benutzt werden, dies war beim Motion Boom Plus möglich.

Klangqualität

Der Motion Boom Plus ist klanglich nochmal eine deutliche Steigerung zum Motion Boom (PLUS). Der Sound löst sich unter „Spital Audio“ spürbar vom Gerät und verbreitet sich im Raum. Trotzdem hört man hier den Eingriff von DSP heraus. Natürlich kommt so eine Lösung NIE an ein „richtiges“ Stereo-Setup heran.

Der Bass geht ordentlich tief und man spürt auch den Druck – allerdings nur bei wirklich recht geringen Lautstärken. Alles über Zimmerlautstärke klingt nicht mehr gut. Ja, es bleibt recht verzerrungsfrei, allerdings fehlt halt der Hub. Die kleinen Treiber stoßen eben irgendwann an ihre rein physikalischen Grenzen. Die Mitten sind überaus saftig und präsent und auch die Höhen kommen nicht zu kurz.

Nochmal: So eine Outdoor Bluetooth-Box strebt keine High-Fidelen Klangsphären an – muss sie auch nicht. Für den angedachten Zweck – nämlich eine Party, einen Grilabend, einen Ausflug zum Baggersee oder eine Poolparty – ist sie absolut perfekt geeignet.

Und dennoch klingt der X600 im richtigen Anwendungsbereich absolut klasse – ausgewogen, klar und transparent mit schönem (Tief)Bass, guten Mitten und Brillanten Höhen.

Tipp: Als Behelfs-Soundbar unter dem Zweitfernseher liefert der X600 eine überragende Leistung ab – verglichen mit den TV-Lautsprechern.

Fazit

Der Soundcore Motion X600 ist erneut ein tolles Produkt aus dem Hause Soundcore und m.M.n. eine gelungene Weiterentwicklung zum Motion Boom (Plus). Nicht ganz so bass-stark und laut, dafür aber mit einem differenzierterem Sound, qualitativ schöneren Bässen und kristallklaren Höhen.

Auch als temporäre Soundbar am TV (bei mir: Apple TV) oder als „Küchenradio“ super geeignet. Darüberhinaus natürlich im Sommer ein perfekter Begleiter für Garten oder Terrasse.

Soundcore Motion X600 | Bewertung

9.6

Sound

9.4/10

Verarbeitung

10.0/10

Funktion

9.5/10

Preis/Leistung

9.5/10

Pros

  • Toller Klang
  • Wasserdicht
  • Edle Optik
  • Universell nutzbar

Cons

  • Systembedingt nur was für Leisehörer
Soundcore Motion X600 | Testbericht - Kopfbox.de | Kopfhörer, DAP, Kopfhörerverstärker und alles um mobiles Audio im Test (2024)

FAQs

How do I reset my Soundcore motion speaker? ›

If you encounter issues such as being unable to connect to Bluetooth, noise, audio delay, or no sound, please reset your device. To reset your Soundcore Motion Boom Plus: Power it on, hold the bluetooth and volume+ button at the same time for 5-8s.

Why is my Soundcore not connecting to my phone? ›

If you fail to connect the speaker to your device, you can try the following steps: - Confirm the speaker is fully charged and it's not paired with other devices. - Forget all Bluetooth pairing records on your device. - Reboot your speaker and your device.

Is Soundcore worth it? ›

The Soundcore Motion 300 is Anker's answer to that Bose speaker. Around the same size as the Bose, it doesn't sound quite as good, but it sounds impressive for its compact size and costs only $80. As a result, we've awarded it a CNET Editors' Choice as a strong value pick in the portable Bluetooth speaker category.

How do I connect my Soundcore motion speaker? ›

Press the Bluetooth button to enter Bluetooth pairing mode, then select "soundcore Motion 300" from the Bluetooth list to connect. To re-enter Bluetooth pairing mode, press the Bluetooth button once. This speaker can only play music on one mobile device at a time.

How do I reset my Soundcore? ›

Place the earbuds in the charging case and leave the case open. Press and hold the reset button on the charging case for 10 seconds until the LED indicators on the charging case start to scroll and then stay on for 5 seconds. At this time, your earbuds have been successfully reset.

How do I factory reset my speaker? ›

Manufacturers often provide a designated button or a button combination specifically for resetting the speaker. Locate the reset button or buttons and press and hold it for a few seconds. The duration may vary depending on the brand and model of your Bluetoothspeaker, but around 10 seconds is typically sufficient.

How do I connect my Soundcore to my new phone? ›

Here's how to pair Soundcore headphones to an Android phone or tablet:
  1. Put the headphones in pairing mode.
  2. Navigate to Settings > Connected devices on your Android phone or tablet and turn on Bluetooth.
  3. Tap Pair new device and wait for your earbuds to appear.
  4. Select your headphones from the list of Available devices.
Feb 11, 2024

Why is my left Soundcore not connecting? ›

Remove the left earbud and tap the side 4 times, then out it back into the case. Take both out of the case at the same time, you will see the lights on top flashing white or blinkin in a breathing way. Once the earbuds start this or flash red, reconnect to your phone and enjoy your music.

Why won't my iPhone connect to Soundcore speakers? ›

Speaker Not in Pairing Mode

First turn off Bluetooth on the device you want to connect to. Then press the Bluetooth button on the speaker down for 2-3 seconds to enter pairing mode. A flashing blue light indicates the speaker is in pairing mode. Once in pairing mode, try reconnecting to the speaker.

Is Soundcore a Chinese company? ›

Soundcore is located in Shenzhen, Guangdong, China .

Why is Soundcore so cheap? ›

Anker Soundcore Space One

They sacrifice things like premium materials and some high-end features to keep the price down, and while they're active noise-cancellation capabilities and overall sound quality aren't as good, either, they're not that much worse.

Are Sony better than Soundcore? ›

The Sony are more comfortable, feel better built, and have a better-balanced sound profile right out of the box. Their active noise cancelling feature can reduce more noise around you, and they have an auto-off timer to help conserve their battery life when not in use.

Why is Soundcore not pairing? ›

If you fail to connect the speaker to the Soundcore app, you can try the following steps: - Make sure you choose the right speaker model in the Soundcore app. - Uninstall the Soundcore app and reinstall the Soundcore app. - Reset the speaker .

Can you pair Soundcore to two devices? ›

The multipoint connection feature lets your headphones connect to multiple devices like your phone and computer at the same time.

Does Soundcore Motion+ have aux? ›

Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device. Use the included USB cable to charge your Soundcore Motion+ and make sure it is fully charged before its first use.

How do I fix my Soundcore speaker? ›

soundcore speakers failed to connect with my devices
  1. Confirm the speaker is fully charged and it's not paired with other devices.
  2. Forget all Bluetooth pairing records on your device.
  3. Reboot your speaker and your device.
  4. Disable and enable Bluetooth on your device.
  5. Reset the speaker.

Why is only one of my Soundcore working? ›

Put the earbuds into the charging case and close for 10 seconds, then open the charging case to try pairing again. If that doesn't work, try the following: 1- Make sure your headphones are fully charged. 2- Make sure that the volume is turned up on both the headphone and the connected device.

How to repair Soundcore Motion Plus? ›

If the sound from your Soundcore Motion Boom Plus speaker is cutting in and out, you can try the following steps: - Confirm the speaker is fully charged. - Turn it on, hold the bluetooth button and volume+ button at the same time for 5-8s. - Restart your speaker and the device it is paired with to test again.

How do I reconnect Soundcore? ›

So, let's get started!
  1. Press and hold the "power on" button for 1s-3s until you hear the boot-up tone.
  2. The headphones will automatically reconnect to the last device.
  3. If the headphones do not reconnect to the last device after continuously sending a reconnection signal for 5s, it will enter pairing mode again.

Top Articles
Latest Posts
Article information

Author: Tish Haag

Last Updated:

Views: 6315

Rating: 4.7 / 5 (47 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Tish Haag

Birthday: 1999-11-18

Address: 30256 Tara Expressway, Kutchburgh, VT 92892-0078

Phone: +4215847628708

Job: Internal Consulting Engineer

Hobby: Roller skating, Roller skating, Kayaking, Flying, Graffiti, Ghost hunting, scrapbook

Introduction: My name is Tish Haag, I am a excited, delightful, curious, beautiful, agreeable, enchanting, fancy person who loves writing and wants to share my knowledge and understanding with you.